Thirty-two standard models of outdoor litter bins and multi-stream recycling stations — galvanized steel, stainless steel and wood-grain aluminium, built for streets, parks, campuses and commercial frontage.
A public bin has one job that matters: it must still work after years of sun, rain, salt and daily handling. Our bins are built around that premise — 1.0–1.2 mm galvanized steel bodies, polyester powder coating, stainless fasteners, and doors that open with a standard service key.
The range covers the full collection chain: single and twin litter bins for sidewalks, two-, three- and four-stream sorting stations for plazas, canopy-top models with integrated ashtrays, and enclosed kiosks for high-traffic transit nodes. Interiors accept standard 60–120 L liners, so operators can service them with the equipment they already own.

Filter by series. Each card shows the standard size — send the model and we quote the customized version.
































| Series | Material | Size | Capacity | Typical use |
|---|---|---|---|---|
| JT-WB-S | Powder-coated steel | 800×380×900 – 1270×470×1010 mm | 60–120 L × 2–3 | 2 / 3 |
| JT-WB-W | Wood-grain aluminium | 770×420×920 – 1000×400×1030 mm | 60–80 L × 2 | 2 |
| JT-WB-X | Brushed stainless | 690×490×980 – 1000×400×1000 mm | 60–80 L × 2 | 2 / 4 |
| JT-WB-C | Steel, two-colour | 900×360×960 – 1000×420×1000 mm | 80–100 L × 2 | 2 |
Hot-dip galvanized or zinc-primed steel, chromate pre-treatment and a 60–80 μm polyester powder coat. Salt-spray tested for coastal and de-icing exposure.
Two-, three- and four-stream configurations with colour-coded apertures, pictogram labels and optional bilingual plates — recyclables, residual waste, glass, paper and batteries.
Front-opening doors on stainless hinges, standard triangle or square service keys, removable inner liners and a bag-retaining ring on every model.
Lockable doors, concealed fixings, rounded edges and drainage holes in the base. Canopy tops shed water away from the aperture.






One 20-foot container mixed across models is our normal project MOQ — roughly 60–120 bins depending on size. Sample orders of a single unit are possible for evaluation.
Yes. Aperture shape, stream count, pictograms and language of the labels are all project-specific. We produce the label artwork from your waste-separation scheme and send a PDF proof before production.
Standard 60–120 L plastic liners can be shipped with the bins, or we can match the liner brand your waste contractor already uses.
Each bin is foam-wrapped, corner-protected and packed in a printed carton or plywood crate. Loading plans are issued before shipment so you can check container utilisation.
Send the model, quantity and destination port. Shop drawings and pricing within 3–5 working days.
Send the product, the quantity, the destination port and the date you need it on site. We reply with a price and a shop drawing — usually within one working day.